Difference between revisions of "Chapter 5"

Latest revision as of 21:16, 26 November 2010

Tags

All these things you have learned so far seem rather restrictive don't you think? Well, I personally don't think they are very restrictive and I was able to script most things that people are scripting today in about version .40. But think about it. Items are restricted to MORE, MORE2, etc. Those poor characters only have PLOT2 to store stuff in before you have to start resorting to storing information on the variables of their backpack.

So SPHERE developers gave us a long-awaited feature:

The TAG.

Important TAG principle number one, even before you know how to use them:

ALL TAGS ARE STRINGS. PERIOD.

They are also just about the simplest part of SPHERE you will ever use. Here is an example of a tag:

SRC.TAG.JOE = 1

What did we just do? We just CREATED a variable on the SRC of this script. This variable is named TAG.JOE and has a value of 01. (Keep in mind that is the string 01, not the number 01.) It will be saved with the character and we can put ANYTHING WE WANT into it.

How's that for powerful?

Here are some more examples of TAGs:

ON=@DClick

SRC.TAG.GOOFYTAG = // remove the tag

RETURN 0 // Allow them to unequip

In those three examples, you have the three ways you can use a TAG.

1. A TAG can store a number as in the first example. Unfortunately, it stores that number as a string, so we must use EVAL every time we want to use that number.
2. A TAG can store a string, as in the second example. Actually TAGs always store strings, but this one is obviously a string.
3. You can delete a TAG. We do this by typing the name of the tag and then an equal sign with nothing after it. Why would we ever want to delete a TAG? Well, TAGs, like everything else, use memory. The more memory you use, the more lag your server has.

TAG principle number two:

ALWAYS DELETE A TAG YOU ARE FINISHED USING.

You may not be finished using a TAG at the end of a script. Or even when the server shuts down. In fact, there are some TAGs you'll want to stay on the character forever. However, if you finish using a TAG for any reason, DELETE IT. It conserves memory and is good scripting practice in general.

Here is another important TAG principle. While the TAG is a very powerful feature, it has its limits. A TAG can ONLY be used on the following objects:

1. Characters.
2. Items.
3. Regions. Yes, regions can have TAGs.

It's very hard to give examples of the use of TAGs without going into a complex system. Most complex systems will use two, three, or more PERMANENT tags. For example, a system involving experience points might store numbers in TAG.CURRENT_EXPERIENCE_POINTS and TAG.CURRENT_LEVEL. You'll find a good example of when to use TAGs to your advantage in chapters from now on, as I present more and more complex scripts. BTW, when you're dealing with tags, sometimes you need to check if a tag exists or if it has a value. If it doesn't exist SPHERE gives a stupid error on the console. To avoid that, we make TAG's default to 0 by using TAG0 instead of TAG if the tag doesn't exist. If you want to you can always use TAG0 instead of TAG to be safe. Say you write this line of code:

MORE = <EVAL <TAG.JOE>>

If TAG.JOE contains no value (or hasn't been defined yet), you will get an error on the console that says something like this: Undefined value ' '. To complicate matters, the value of MORE will not change, which will severely screw up your script. To prevent this, use the following method:

MORE = <EVAL <TAG0.JOE>>

In this case we have used TAG0 to access the TAG value. Accessing the TAG in this manner will return the value as normal, except for when TAG.JOE is undefined a "0" will be returned rather than a script error being raised.

The same trick can also be used when setting the value of a TAG. For example:

TAG0.JOE = <MORE>

As you may expect, this sets the value of TAG.JOE to whatever value is held in MORE. The difference however is that because we have used TAG0 when setting the value, if the value of MORE is zero then TAG.JOE will actually be cleared! This may initially sound undesirable but it offers the benefit of reducing the number of TAGs stored on the object. Since we can use TAG0 to retrieve a value of zero when a tag doesn't exist then you may be wasting memory by storing a large number of TAGs all with a value of zero. Of course if you do decide to use TAG0 when setting the value of a TAG then you should ensure that you also use TAG0 when reading that value back, or else you will quickly run into the aforementioned "Undefined value" script error.

CTags

CTAGs are temporary versions of TAGs that are only available with objects (i.e. online player characters). CTAGs are not saved and will be cleared when the player logs out. This means that you don't have to worry about removing the tag after using it, assuming the player logs out one day :). You can use CTAG0 too, used just the same as you can with TAG0. In short, if you are going to use tags that will no longer be needed after logging out, it is probably a good idea to consider using a CTAG.

Note: CTAG can only be used with online players. Attempting to read from or write to a CTAG on a logged out player will raise a script error.

Useful TAG/CTAG Functions

Vars

Perhaps you're wondering if there is a less memory-consuming method. Of course you were, don't deny it.

And here I present it to you:

VAR.CHEESE = 1

Important VAR principles:

1. Like TAGs, VARs are always stored as strings.
2. Unlike TAG, VARs are not attached to any particular object. You never EVER use [obj].VAR.BLAH.
3. VAR variables are GLOBAL, meaning they can be accessed from any script.
4. Never assume a VAR has a specific value stored at the beginning of an event, especially if the same VAR is used in multiple scripts.
5. Like TAGs, VARs can have any name. VAR.CHEESE, VAR.BLAH, VAR.WORLD_TIME, VAR.HELLO_WORLD
6. If you don't need a value to be permanent, but need a place to store it temporarily during a script, use LOCAL, not TAG, not VAR.

VARs are global TAGs. That's about it.

If you want to get list of all VARs on your server type (into client or console): SERV.VARLIST, and if you want to log them into console write SERV.VARLIST LOG (this will not be saved into logfile).

If you want to remove all server variables (VARs) type SERV.CLEARVARS.

And that's your entire lesson on the VAR feature. I told you it would be short. As with TAG0 and CTAG0, you can also do VAR0. It works just like TAG0 or CTAG0 does. If that variable has no value then VAR0 will return 0 instead of nothing.

Locals

LOCALs are like VARs except they are only accessible within the script block they are defined in (i.e. a function or trigger) and then they are immediately cleared. The advantage is that they are much faster than VARs and you also don't have to worry about different scripts interfering with each other.

The following script demonstrates why you may want to use a LOCAL rather than a VAR:

[FUNCTION f_var_joe]
VAR.NAME = Joe
F_VAR_BOB
SYSMESSAGE <VAR.NAME>
RETURN

[FUNCTION f_var_bob]
VAR.NAME = Bob
SYSMESSAGE <VAR.NAME>
RETURN

The idea with the two functions above is that F_VAR_JOE will show the message "Joe" and F_VAR_BOB will show the message "Bob". However, if you were to go ingame and type .F_VAR_JOE, you would receive two messages saying "Bob". Why is this?

Well, if you look closely at F_VAR_JOE you will see that after setting VAR.NAME to Joe, it then executes the function F_VAR_BOB and inside F_VAR_BOB we then set VAR.NAME to Bob. Because VARs are global variables, this inadvertently affects the behaviour of F_VAR_JOE and we don't get the output that we were after. Another flaw you may have not spotted with this script is that we haven't cleared VAR.NAME before the script ends and so Sphere still has VAR.NAME stored in memory (which in this particular case is a waste of resources as we have no further use for VAR.NAME).

In this particular scenario we could modify the functions to use different VAR names but unless we intend to manually check every script on the server we could easily end up using a VAR that another script is using and prevent that from working instead.

This is where the LOCAL comes in to play, see the following example:

[FUNCTION f_local_joe]
LOCAL.NAME = Joe
F_LOCAL_BOB
SYSMESSAGE <LOCAL.NAME>
RETURN

[FUNCTION f_local_bob]
LOCAL.NAME = Bob
SYSMESSAGE <LOCAL.NAME>
RETURN

The above functions are identical to the previous ones, except they use LOCAL instead of VAR. This time when you type .F_LOCAL_JOE ingame you will receive "Joe" and "Bob" messages as we originally intended.

This is because the LOCALs only exist within the functions that define them. When F_LOCAL_BOB attempted to use LOCAL.NAME it received its own version of the variable that doesn't interfere with the one defined in F_LOCAL_JOE. When F_LOCAL_BOB returns, F_LOCAL_JOE still has its original LOCAL.NAME with "Joe" still stored inside it.

Of course there may come a time where you do want to share LOCALs with another function, and this can be accomplished by using the CALL command. When you use the CALL command to run a function instead of running the function directly the LOCALs are shared between both scripts, for example:

[FUNCTION f_bla]
LOCAL.DUDE = Bob
RETURN

[FUNCTION f_bleep]
CALL F_BLA
NAME = <LOCAL.DUDE>
RETURN

When we run the F_BLEEP function above, the CALL line allows LOCAL.DUDE to be set in F_BLA and be accessible to F_BLEEP afterwards. Therefore, the NAME = <LOCAL.DUDE> line will set the name of the object to whatever the F_BLA function set LOCAL.DUDE to (in this case "Bob").

Unlike TAGs, CTAGs and VARs, LOCALs do not have a LOCAL0 equivalent. This is because LOCALs will always return 0 when they empty (and so, they can never be blank/empty).

Floats

This is the most simple. Since you know many variables at this point and know how to use them. FLOATs are almost the same as LOCALs, just a difference. LOCALs store only text or entire numbers (34 or 12), while FLOATs stores decimals (23.1 or 45.3). Another difference is the EVAL here is changed to FLOATVAL. This is one example of FLOAT used to calculate hit speed:

[EVENTS e_test]
ON=@HitTry

FLOAT.FSPEED = <FLOATVAL <SERV.SPEEDSCALEFACTOR> / ((<DEX> + 100) * <ARGO.SPEED> + 1)>

ARGN1 = <FLOAT.FSPEED>

Functions

What's your [FUNCTION]?

The single most powerful SPHERE scripting tool to date.

You have a wealth of built-in object functions available to you. However, there seems to be some limits. For example, let's take a look at the following example of a very poorly written script:

ON=@DClick

SERV.NEWITEM=ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 017a6

NEW.MOVE -1 -1

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 017a3

NEW.MOVE -1 0

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 017a8

NEW.MOVE -1 1

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 0179f

NEW.MOVE 0 -1

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 0179b

NEW.MOVE 0 0

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 017a1

NEW.MOVE 0 1

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 017a5

NEW.MOVE 1 -1

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.LINK = <SRC.UID>

NEW.MORE = 0179d

NEW.MOVE 1 0

SERV.NEWITEM = ispell_7_water_sparkle

NEW.P = <SRC.TARG.P>

NEW.MORE = 017a7

NEW.LINK = <SRC.UID>

NEW.MOVE 1 1

RETURN 1

Do you notice anything about this script? How about the fact that it's repeating the same few lines over and over? Do you think we could do anything to fix this problem? I thought so too. We need a way to write a set of code once, like this:

SERV.NEWITEM = ispell_7_water_sparkle
NEW.P = <SRC.TARG.P>
NEW.MORE = 017a7
NEW.LINK = <SRC.UID>
NEW.MOVE 1 1

And have a way to "call" this code over and over again. I give you.... the [FUNCTION]!

[FUNCTION create_sparkle]
SERV.NEWITEM = ispell_7_water_sparkle
NEW.P = <TARG.P>
NEW.MORE = 017a7
NEW.LINK = <UID>
NEW.MOVE 1 1

RETURN

And in a script, we could go like this:

ON=@DClick

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

SRC.CREATE_SPARKLE

RETURN 1

Once you have learned how to use FOR loops, you could also reduce this script even further to:

ON=@DClick

FOR 8

SRC.CREATE_SPARKLE

ENDFOR

RETURN 1

Doesn't that look slightly more pretty than the previous version? We managed to cut about 40 lines down into 3 or so. But do you notice a problem? Our code is fixed. Those items are going to be created and moved 1 square down and one square right, every single time. We need a way to specify some parameters to our function!

And so we have the ARG* commands. There are three types of arguments we can give to a function: numeric, string, or object. I recommend always using the string arguments and using EVAL to get whatever else you need. What variables are associated with these arguments?

ARGN, ARGS, and ARGO respectively. N for "number", S for "string" and O for "object".

Let's rewrite our function and event using this new information:

[FUNCTION create_sparkle]
SERV.NEWITEM = ispell_7_water_sparkle
NEW.P = <TARG.P>
NEW.MORE = 017a7
NEW.LINK = <UID>
NEW.MOVE <ARGS>

[SOME ITEMDEF GOES HERE]

ON=@DClick

SRC.CREATE_SPARKLE -1 -1

SRC.CREATE_SPARKLE -1 0

SRC.CREATE_SPARKLE -1 1

SRC.CREATE_SPARKLE 0 -1

SRC.CREATE_SPARKLE 0 1

SRC.CREATE_SPARKLE 1 -1

SRC.CREATE_SPARKLE 1 0

SRC.CREATE_SPARKLE 1 1

RETURN 1

Get it? Every time we call the function with our new create_sparkle command, we "pass" it the values following the command. SPHERE automatically puts those values in ARGS, without any help from us.

There is another problem with functions that many new scripters do not understand, and that is the concept of the default object. In a normal script, the default object is the object on which the script is being executed. In a @DClick script, it's the item being double-clicked. In an @Equip script, it's the item being equipped. But what are the objects available in a function. Well, it all depends on how you call it.

The default object in a function is the object that called the function. In the case of our above example, SRC called the function, so the SRC becomes the default object. You'll notice that I removed any mention of SRC from the lines inside of the function itself. We could easily have said this instead:

CREATE_SPARKLE

Then, the default object would have been the item and SRC would still be SRC. But its a lot easier to see it the other way, at least in my opinion. That way you don't get confused either. If you WERE to include the SRC, and accidentally call your function with something like this:

SRC.ACT.CREATE_SPARKLE // Not a really likely occurrence in this case, but in other cases it is

Then you would no longer have a SRC and you would get a lot of scary errors that would be kinda difficult to track down, since you probably wouldn't think to check the function call. Functions generate enough scary errors as it is when you screw them up. Don't make it worse.  :)

There is still another problem with my script. It's assigning the same MORE value to each of the newly created items, and as you can see from the original long script, this isn't what I wanted it to do. I wanted each item to have a specific MORE value, which is used elsewhere in the script. So what are we to do? Well there are a number of solutions, but the most obvious would be to utilize that VAR feature we discussed in the previous section. Let's take a look at the completed script:

[FUNCTION create_sparkle]
SERV.NEWITEM = ispell_7_water_sparkle
NEW.P = <TARG.P>
NEW.MORE = <EVAL <VAR.MORE_VALUE>>
NEW.LINK = <UID>
NEW.MOVE <ARGS>

[SOME ITEMDEF GOES HERE]

ON=@DClick

VAR.MORE_VALUE = 017a6

SRC.CREATE_SPARKLE -1 -1

VAR.MORE_VALUE = 017a3

SRC.CREATE_SPARKLE -1 0

VAR.MORE_VALUE = 017a8

SRC.CREATE_SPARKLE -1 1

VAR.MORE_VALUE = 0179f

SRC.CREATE_SPARKLE 0 -1

VAR.MORE_VALUE = 017a1

SRC.CREATE_SPARKLE 0 1

VAR.MORE_VALUE = 017a5

SRC.CREATE_SPARKLE 1 -1

VAR.MORE_VALUE = 0179d

SRC.CREATE_SPARKLE 1 0

VAR.MORE_VALUE = 017a7

SRC.CREATE_SPARKLE 1 1

VAR.MORE_VALUE =

RETURN 1

The value of the VAR is carried over, since VAR variables, as we know, are global. We've managed to reduce a 40 line script into a 20 line script and keep the original functionality. And this is only for calling a function 8 times. The more you use a function, the more space it saves later.

And that is my chapter on functions. Later on, we'll see very useful purposes for doing this, other than eliminating a lot of lines of typing.